New profile posts

Good morning

Of all the kind folk that have offered advice on forums - yours has been the most sound and logical.
I respect that , and wondered if I could pass a quick question past you please ?

Many thanks

Steve

e mail if its easier

[email protected]

Hi Jiffage - I've come up against the EXACT same issue as you, relating to a planned kitchen extension. All within permitted development but the case officer is being picky about a small old outside toilet connected to our back wall.

How did you deal with this in the end? Any tips?

https://www.diynot.com/diy/threads/what-impact-does-the-gpdo-ammendment-in-reaction-to-hilton-have-on-my-side-extension.487907/

Hi
When I stuck in issue, I prefer to search your suggested solution. I myself a structural engineer but with limited knowledge. I have a 300 mm cavity wall to support with 152 beam with 8mm plate on top. BC has asked for calculation to verify top plate. I don't know how I can provide calcs for plate against line load.I tried to do plate design in tekla tedds. Any suggestion or any manual calculation?
Thanks

Shower Panels advice, fitting shower panels over existing tiles. Does anybody have any advice how to measure the holes for the water feeds.

Any enquiries regarding this application should be directed to:-
JANET SMITH
BT Wayleaves Scanning Office
Post Point 215W
Telephone Exchange
Town Walls
SHREWSBURY
SY1 1TY

08000232023option4option2
[email protected]

Hi Boilerdoktor, I have been reading a post regarding a green star 40cdi conventional boiler with rapid rising temperature issues and the potential that it might be a PCB update issue. I would be really grateful if you could provide some advice or better still have a look at the boiler. I live in Launceston Cornwall so not far away. Do you have a contact number?

Gazr
Looks like the batten gauge was out, so just adjusted top batten rather than take all off and start again.


Read more: https://www.diynot.com/diy/members/23vc.228603/#ixzz7JPgKto4M

Looks like the batten gauge was out, so just adjusted top batten rather than take all off and start again.

Did u get your wiring signed off?

Hi, I have the exact same boiler as your dads the EcoTec Pro 28 and trying to fit the hive also.

Have you managed to fit the hive and is it working ok? If so would you happen to have a picture of the finished wiring as I thought it was easy just to swap over the receiver but I’ve missed something.

Rangemaster Cooker Hood, i have a Rangemaster cooker hood that only works on max speed would this be a switch issue or Motor issue ?

Hi, been advise to contact you regarding my thread. "ADT Galaxy 16 Plus overcharging backup battery". Could you please help?
Thanks.

Hi, write in this post then post. The message will come to me.

One of the guys on this forum (Gasguru) asked me to offer help with sorting out your install.

If you still need help you can contact me through my website

Www.urbanplumbers.co.uk

Thanks

Hello, any chance of a better quality image of the Glowworm 30cxi diagram please? Thanks