|
Trend Keyhole Slotter Router Cutter 12.7mm 4.9mm 1/4"
A keyhole recess for picture hanging flush to the wall. Ref. 35/01 - No.10 & No.12 screw heads. Not suitable for grooving applications. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 &... |
£47.95 More Information |
|
Trend Roman Ogee Bearing Guided Router Cutter 34.9mm 20mm 1/4"
With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 20 • Overall Length Metric: 58 • Bearing Dia... |
£69.95 More Information |
|
Trend Router Guide Bush 22.2mm
Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Specifications: ... |
£13.95 More Information |
|
Trend Finger Jointer Bearing Guided Router Cutter 24.6mm 18.5mm 1/4"
A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints. Specifications: • Shank Diameter: 1/4 • Dia Metric: 24.6 • Cut Length Metric: 18.5 • Overall Length Metric: 58 • ... |
£78.95 More Information |
|
Trend CRAFTPRO Chamfer V Grovve Router Cutter 18.4mm 17mm 1/2"
For veining, panelling, 'V' grooving, bevelling & chamfering. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 9.2 • Overall Length Metric: 54.5 • Angle: 4... |
£23.95 More Information |
|
Trend Ovolo Rounding Over Router Cutter 18mm 10mm 1/4"
Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/4 • Dia Metric: 18 • Dia2 Metric: 12 • Cut Length Metric: 10 • Overall Length Metric: 38.6 • R... |
£47.95 More Information |
|
Trend Professional Two Flute Straight Router Cutter 16mm 19mm 1/4"
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 16 &... |
£35.95 More Information |
|
Trend TCT Through Drill 201 Series Left Hand Rotation 10mm 25mm 10mm
Tungsten carbide tipped dowel drill with V point . Suitable for drilling tear free through holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adjusting scr... |
£32.95 More Information |
|
Trend CRAFTPRO Weatherseal Groover Router Cutter 36mm 2.5mm 1/2"
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accept a weatherseal. Specifications: &bul... |
£52.95 More Information |
|
Trend TCT Dowel Drill 201 Series 5mm 35mm 10mm
Tungsten carbide tipped dowel drill with centre point and two spurs. Suitable for drilling blind holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylindrical shank with flat and length adj... |
£22.95 More Information |