|
Trend Rotatip Trimmer Bearing Guided Router Cutter 19mm 30mm 1/2"
Blades of cutters can be rotated through 180 degrees to give one new cutting edge. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19 • Cut Length Metric: 30 • Overall Length Metric: 78 • Bearing Dia Metri... |
£98.95 More Information |
|
Trend CRAFTPRO Radius Router Cutter 12.7mm 19mm 1/2"
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia... |
£36.95 More Information |
|
Trend CRAFTPRO Wood Cutting Mitre Saw Blade 255mm 42T 30mm
Trend Craft Pro saw blade - 255mm diameter 30mm bore 42tooth TCT Specialist blade with -5 degree hook, 2.4mm kerf with 1.8mm plate thickness for clean, safe cutting with mitre saws. Ideally suited for general purpose crosscutting and mitreing w... |
£36.95 More Information |
|
Trend Professional Two Flute Straight Router Cutter 6mm 16mm 1/2"
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: 6 • Dia Imperial: 15/64 •... |
£36.95 More Information |
|
Trend Router Guide Bush 27mm
Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Specifications: ... |
£13.95 More Information |
|
Trend CRAFTPRO Round Over and Ovolo Router Cutter 31.7mm 15.9MM 1/2"
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also... |
£51.95 More Information |
|
Trend Snappy Long Series Phillips Screwdriver Bit PH3 150mm Pack of 1
Extra long Phillips screwdriver bits For use with Trend Snappy Quick Chuck. Specifications: • Shank Diameter: 1/4 hex • Overall Length Metric: 150 • Type or Grade: PH3 • Pack Qty: 1 pack... |
£10.95 More Information |
|
Trend Ovolo Rounding Over Router Cutter 38mm 18mm 1/2"
Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/2 • Dia Metric: 38 • Cut Length Metric: 18 • Overall Length Metric: 56.1 • Radius 1 Metric: 12.7... |
£78.95 More Information |
|
Trend Bearing Guided Template Profiler Router Cutter 12.7mm 32mm 1/2"
Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be le... |
£51.95 More Information |
|
Trend Slotter Blade for 1/4 Bore Arbor 36mm 4mm 1/4"
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. Specifications: • Dia Metric: 36 • Sawb... |
£37.95 More Information |