These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. D 1 inch D 25.4 mm C 5/8 inch C 15.9 mm R 12.7 mm Overall length 56.5 mm Shank Diameter 1/4 inch

Solid laminate. Accepts Trend Guide Bushes. Supplied with line-up pin and bush. Ensures concentricity of cutter and guide bush. Suitable for : Festool OF1400 Bosch POF1400 This product includes: 1 x Sub base 1 x Template Guide Bush 1 x 1/2"...

Self-guiding chamfer/bevel cutter. D 32 mm C 1/2 inch C 12.7 mm B 9.5 mm A 45 degrees Overall length 60 mm Shank Diameter 1/2 inch

This sub-bale will be drilled to order, please call 0115 956 5555 to arrange for it to fit your router. This product includes: 1 x Sub base 1 x Template Guide Bush 1 x 1/2" Line-up pin 1 x 1/4" Line-up pin

The optional dust kit set for use with the mortise & tenon jig. Dust spout aperture 58 mm (2-1/4 inch) Adaptor OD 58 mm (2-1/4 inch) Adaptor ID 35 mm (for 39 mm OD hose) This product includes: 1 x Deflector plate 1 x Spout 1 x Hose adaptor...

This teardrop shaped base is fitted to the router and allows better control when edge moulding, by preventing router tilt. Size 280 x 180 x8 mm Aperture dia. 40 mm Max. cutter dia. 36 mm This product includes: 1 x Teardrop shaped base 1 x Knob...

Used for trimming plastic or plywood overlays. D 1/2 inch D 12.7 mm C 50 mm B 12.7 mm A 90 degrees Overall length 104.5 Shank Diameter 1/2 inch

For coves and part of a rule joint. 1/2" shank diameter. D 16 mm C 19.5 mm R 5/16 inch R 8 mm OL 57.5 mm

Made from solid laminate provides an instant means of squaring off, marking out, setting up jigs etc. Overall length 703 mm Blade length 645 mm Blade thickness 3 mm Blade width at butt 70 mm Blade width at end 42 mm Butt length 280 mm Butt thickness...

This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height. It is especially useful for accurate work such as when the router is held inverted in a router table. Suitable for the following:- TREND T10 ...