Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. D1/4 inch D7.9 mm C3/4 inch C19.1 mm Overall length: 59.5 mm Shank Diameter: 1/4 inch Two flute carbide TCT tips for cleaner cutting...

This dovetail cutter produces a tight reliable joint for drawers, boxes etc. D 1/2 inch D 12.7 mm C 1/2 inch C 12.7 mm Overall length 60.5 mm A 104 degrees Shank Diameter 1/4 inch

Designed to fit hoses to extraction fittings.

Tool steel plug/pellet cutter which allows you to cut plugs to fill the holes left by pocket screws. Use in a pillar drill to allow plugs to be made up to 52mm long to be created in end grain. Using the same timber as the project ensures the plug matches.

Bushing washers supplied to reduce bore diameter for certain makes and models of saw.

Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only.

This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height.

This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height.

A 3mm spacer pack for use with the Hinge jig to allow it to be used on architrave that is set back by 4mm. Easy to retro fit to existing hinge jigs and allows for new style architectural designs. Supplied with fixing screws.

Rigid plastic safety pushstick for guiding small sections of timber over a router or table saw.