Dead bugs and debris coming out of hot water tank.

The fortic tank has been cleaned. What is the heating header cistern? The plumber used a wet vac
 
Sponsored Links
Pictures of fortic cylinder
Pictures of cold tank in the loft (disgusting I know)

Can't get pictures inside fortic cylinder ATM But will soon
 

Attachments

  • IMG-20241125-WA0016.jpg
    IMG-20241125-WA0016.jpg
    180.3 KB · Views: 27
  • IMG-20241125-WA0014.jpg
    IMG-20241125-WA0014.jpg
    142.5 KB · Views: 25
  • IMG-20241125-WA0012.jpg
    IMG-20241125-WA0012.jpg
    318.7 KB · Views: 26
  • IMG-20241125-WA0003.jpg
    IMG-20241125-WA0003.jpg
    333.7 KB · Views: 25
  • IMG-20241125-WA0007.jpg
    IMG-20241125-WA0007.jpg
    323.3 KB · Views: 27
Both tanks, should have lids on them, in part to keep dirt out, but also to help reduce the moisture evaporating out of them. Before fitting a lid to that loft header tank, it needs a good clean out.
 
Sponsored Links
Hmm good point. Do British gas usually do that?
Any heating engineer worth his salt should make sure the system is clean before fitting a new boiler. The header tank is part of that and usually contains plenty of muck. I’d be surprised if the manufacturer would entertain a claim for a fault if it found all that muck in it.
 
Last edited:
Any heating engineer worth his salt should make sure the system is clean before fitting a new boiler. The header tank is part of that and usually contains plenty of muck. I’d be surprised if the manufacturer would entertain a claim for a fault if it found all that muck in it.
Hmm yeah, thanks. We were pretty naive to it as we had the boiler done pretty much straight away. It's been past the years warranty for the heating system now too so it's only the boiler that is covered.

Do the pictures help anyone understand why I'm getting dead bugs out of the hot tap?
 
Yeah. No lid on the storage tank. There’s no other way they can get into the hot water system.
Yes there is, it’s the cistern in the loft that doesn’t have a lid, which is completely separate from the dhw system
 
Do the pictures help anyone understand why I'm getting dead bugs out of the hot tap?
Could be the overflow, which a bylaw 30 kit is there to prevent, as it has a mesh screen for the overflow for the very reason of which you’re suffering
 
The cold tank in the loft is filthy and lidless, but as I've said in my post we were told this was nothing to do with the hot water as it doesn't feed the hot water.
So that’s an expansion tank, not a cold water storage tank then?
 
So that’s an expansion tank, not a cold water storage tank then?
Yep, feed and expansion cistern.
Yes it's a fortic cylinder. I'll get some pics asap, thank you. The cold tank in the loft is filthy and lidless, but as I've said in my post we were told this was nothing to do with the hot water as it doesn't feed the hot water.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top