fittings for flexible conduit

[Harry Bloomfield]

Why not use 20mm threaded galv boxes and lids, or easier use threaded plastic wiska boxes and make your own junctions

The OP specified the box type, he wanted the flexible to connect to.

 

[SUNRAY]

NO!! Read the product description.

Oh look. Obviously you need help.

View attachment 358355

See that last sentence?

Of course, you could always bodge it with some BluTac or a spare bit of chewing gum......

FWIW In one of the industries I've worked within the spec was often to solvent weld the flexible conduit into rigid fittings.

 

[mattylad]

Make sure that you get the same brand fitting as the flexible conduit.

I have found that if not they do not always go together well due to design differences.

 

[333rocky333]

One of these?

https://www.screwfix.com/p/deta-tte-male-conduit-adaptors-20mm-black-2-pack/351vt[/

The female version is better, a short bit of rigid conduit to join it to the besa box, then screw the flexi glands that Harry suggests into the thread, throwing the bush aside

 

[Jupiter01]

Personally I have never had a problem with solvent welding plastic flexible conduit directly into fittings...

What do you mean by this @SUNRAY?

 

[DetlefSchmitz]

No but why bother under a floor ?

I did it to slow the mice down.