HUD doesn't read consume

[ProblematicMan]

Hi, I have and old car of 25 years and just connected a Head Unit Display to the OBD to read the speed and other data. I have been using this HUD on another car for an year and worked very good, but with this older car it doesn't give me the consume, just says 00.0 L/100km

The day before plugging it, I sprayed the connector with WD-40 because it was full of dust and dirt. I waited one day to let the WD-40 to evaporate a little, but it was still wet the next day. I guess it is not that volatile.

Is there something I can do or because the car has 25 years will not give me this information?

 

[carmanmemoranda]

What car out of interest ?

 

[Brigadier]

Hi, I have and old car of 25 years and just connected a Head Unit Display to the OBD to read the speed and other data. I have been using this HUD on another car for an year and worked very good, but with this older car it doesn't give me the consume, just says 00.0 L/100km

The day before plugging it, I sprayed the connector with WD-40 because it was full of dust and dirt. I waited one day to let the WD-40 to evaporate a little, but it was still wet the next day. I guess it is not that volatile.

Is there something I can do or because the car has 25 years will not give me this information?

25yrs or so ago, data storage was a floppy disc.
1.44mb, iirc

Not even enough for a single photo nowadays.

I doubt your car will have stored much of anything, data wise.

 

[flameport]

The day before plugging it, I sprayed the connector with WD-40

Please don't do that.
WD40 is an electrical insulator, and is absolutely the wrong thing to use on electrical connections of any kind.
For next time, use contact cleaner.

 

[ProblematicMan]

Please don't do that.
WD40 is an electrical insulator, and is absolutely the wrong thing to use on electrical connections of any kind.
For next time, use contact cleaner.

Ouch! I used the WD-40 because I read it was dielectric, so no Short circuit could happen that messes everything up.

Ok, lesson learned. Do you think it will help to use breaker cleaner spray to clean it?

I am thinking maybe I am not receiving the consume data because the WD-40 have insulate the pin that gives this Information. Can this work like this?

 

[ReganAndCarter]

WD40 do the correct electrical contact cleaner these days.

Electrical Contact Cleaner Lubricant | WD-40

Apply the WD-40 Specialist electrical contact cleaner spray to establish strong electrical connections on circuit boards, controls, switches and more. This electrical contact cleaner lubricant removes dirt and residue and dries quickly to leave a clean surface for contact.

www.wd40.com