intergas boilers
- Thread starter lost57
- Start date
Sponsored Links
Onry a rittle bit
you're not wrong.! luckily I've got some wood burners and an electric shower so I won't freeze or remain dirty.!! hardly use to boiler to heat the house anyway., only in the morning.!
That's good its not nice to be cold and ronery
Sponsored Links
I am not ronery , I have a Mrs and kid , and a warranty hopefully as its only two years old.!
I take it you've tried re setting it? Not on a pre payment meter are you?
Will be either:
blocked condense.
dodgy ignition lead
or more likely a dody ignition block - especially if the installer forgot to remove the transit screw.
Simple fix. Service agent should have the parts with him.
If it were me I would swap out the ignitor block and lead.
Very rarely would it be the PCB.
blocked condense.
dodgy ignition lead
or more likely a dody ignition block - especially if the installer forgot to remove the transit screw.
Simple fix. Service agent should have the parts with him.
If it were me I would swap out the ignitor block and lead.
Very rarely would it be the PCB.
I havnt seen anything in the manual about removing a transit screw ?
Yes - b*gger innit? 
New versions don't have one now though so I wouldn't' worry about it.
New versions don't have one now though so I wouldn't' worry about it.
yes I tried that , turned al the power off twice.! is there a reset switch on the front cos I pressed that too.!
not on a pre pay meter and it was working fine half an hour before I ran a bath cos I had the heating on.!
Yes - b*gger innit?
New versions don't have one now though so I wouldn't' worry about it.
my installer is a ****., no time to go. into it again.!
where is the transit screw.?
my boiler is two years old.
Sorry - I have already said too much.
Needless to say - if it is that that has caused the problem, removing it now is unlikely to solve the 4 code now.
As long as he was a Platinum installer with Intergas you will have a 5 year warranty. Otherwise, the good news is the repairs I have mentioned are pretty cheap.
Contact Intergas in the morning and let us know how you get on.
Needless to say - if it is that that has caused the problem, removing it now is unlikely to solve the 4 code now.
As long as he was a Platinum installer with Intergas you will have a 5 year warranty. Otherwise, the good news is the repairs I have mentioned are pretty cheap.
Contact Intergas in the morning and let us know how you get on.
the installer was a complete **** who came recomended , his n ame is mervyn from walnut tree Milton keynes. I will never let him in my house again.
but this morning I turned the gas back on turned the boiler on , switched the stat up and hey presto it came straight on.,heating and water. maybe the has pressure in th the village was low. half of the village is still on oil and coal !
Thinking about it, condensation recycling into the combustion chamber can cause this too if the flue isn't fitted right. Think it only affects combis though.
it don't matter any way cos its dropped off again so ill ring them. this morning!
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links