LED Bathroom Ceiling light

Joined
28 Nov 2024
Messages
2
Reaction score
0
Country
United Kingdom
Can someone advise me on how to change these lights - i thought i'd just be able to take the bulb out but it appears to be attached to the fitting - they are about 8 years old. Any advice would be greatly appreciated! Pics below

IMG_1733.jpgIMG_1731.jpgIMG_1734.jpg
 
Sponsored Links
Can someone advise me on how to change these lights - i thought i'd just be able to take the bulb out but it appears to be attached to the fitting - they are about 8 years old. Any advice would be greatly appreciated! Pics below

If those lights, are LED's, then the likelihood is that you cannot fit replacements, you swap the entire fitting.

If when on, they become too hot to touch, they will be halogen lamps. In which case, try a sucker on the face, to pull the lamp out. Instead of a sucker, you might be able to do it with a decent lump of bluetack.
 
Thanks Harry - they are definitely LED as I remember the builder said they would last for years and years. Not sure i'd know where to start replacing the whole fitting
 
Thanks Harry - they are definitely LED as I remember the builder said they would last for years and years. Not sure i'd know where to start replacing the whole fitting

The black cable, might go to a driver/power supply, or to a 240v joint. Turn the power off, see where it goes, and disconnect it, then you will need to source a electrically, and size matching replacement.

Come back for more advice, once you know where the black supply cable goes.
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top