Texecom Premier Elite 24 (Metal) Wiring Help

[secureiam]

1234

 

[secureiam]

once it says zone setup, press yes (tick), then 008, then No(X), then 0, then Yes, the Menu, menu(looks like sheet of paper icon)

 

[secureiam]

then press 3(global options) then Yes, 3(monitor hardware) Yes, then No, then 7 (B goes to star battery monitoring turned off), then press Yes, then Menu, Menu, 0, Yes, should be at the time and date screen (day mode) no alerts?

 

[Steve.IT]

Ok, so reconnected internal sounders and bell and entered the engineers code

 

[secureiam]

see earlier posts, are you in engineering

 

[Steve.IT]

Would not remove the flashing alerts.

Have tried to program from keypad2 (closest to computer at this point) and now says remote keypad locked out

 

[Steve.IT]

now back to flashing alerts

 

[secureiam]

enter the engineers code several times one straight after the other.

 

[secureiam]

1st time it scrolls through alerts, second time should take you into engineer, occasionally I have known it take three attempts

 

[Steve.IT]

right in and now says

Net RKP > 12..
1 EXP > 1

 

[secureiam]

confirm devices?? if so press Yes and then Yes to confirm

 

[secureiam]

whats displayed now?

 

[Steve.IT]

Pressed yes and confirmed when asked.

display

Net RKP > 12..
1 EXP > 1

 

[secureiam]

menu menu 1 (zone setup), yes, 008, no, 0 yes

whats displayed

 

[Steve.IT]

Done that and disabled zone 008

Display

Yes to select zone setup