The 110mm Black Soil Pipe Strap on Pipe Connector allows you to add a waste pipe to a soil system without the use of a fitting. Simple calculate the point at which you want the waste pipe to enter the soil pipe cut a hole in the pipe using a 54mm - 56mm...

The 110mm Black Soil Boss Pipe Socket/Spigot allows the connection of up to 3 separate waste pipes to the soil system. The boss pipe has 1 open and 2 closed bosses to use the open boss fit the appropriate adaptor which will allow a 32mm 40mm and 50mm...

The Black Leaf/Debris Interceptor Gully provides connection between the rainwater downpipes and drainage system. The product has an integral removable basket that collects leaves and debris stopping them from entering the drainage system and causing blockages....

The Black Cast Iron Style Rainwater Head Ogee Hopper is used to allow the connection of 2 or more neighbouring pipes into one downpipe. The outlet can connect to cast iron downpipe or 68mm round line downpipe. The system offers good flow capacity when...

The 110mm Black Universal Pipe Connector is used to adapt clay or cast iron pipe to 110mm plastic. Simply push the finned end of the adaptor in to the clay or cast iron pipe and the 110mm plastic pipe will push-fit into the socket.

The 87.5° Terracotta Double Socket 110mm Underground Drainage Rest Bend is used at the base of a soil system to allow a stable connection between the soil system and the underground drainage system.

The 110mm Grey Soil Pipe Single Socket 1m has a single socket for simple connection to soil systems. The pipe can be cut to length using a fine tooth saw the cut end should always be chamfered prior to installation and the socketed end of the pipe should...

The 92.5° Black 68mm Cast Iron Style Round Line Downpipe Offset Bend is used for making a 92.5° swan neck/offset from the downpipe outlet to the wall. The system offers good flow capacity when removing rainwater from your roof. Suitable for new builds...

The 45° Terracotta Socket/Spigot 110mm Underground Drainage Bend is used for changing the direction of 110mm underground drainage systems. This push-fit bend has a spigot at one end which should be installed in the direction of flow within the system.

The 112.5° Black 68mm Cast Iron Style Round Line Downpipe Offset Bend is used for making a 112.5° swan neck/offset from downpipe outlet to the wall. It offers good flow capacity when removing rainwater from your roof. Suitable for new builds house refurbishments...