The 92.5° Black Access Bend 110mm Soil Pipe allows access within the soil stack to enable easy testing cleaning and maintenance of the soil system. This push-fit access bend has a spigot at 1 end which should always form the lower joint and a socket...

Solvent weld waste 40mm Black pipe clip.

The 110mm Grey Universal Pipe Connector is used to adapt clay or cast iron pipe to 110mm plastic. Simply push the finned end of the adaptor in to the clay or cast iron pipe and the 110mm plastic pipe will push-fit into the socket.

The 110mm Anthracite Grey Soil Pipe Clip supports the soil stack around the pipe. Soil pipe brackets should be fitted at a maximum of 2m centres vertically and 1m centres horizontally.

Push-Fit Waste 32mm Black Pipe Clip

The 112mm Black Cast Iron Style Round Line Gutter Union Bracket is used to connect 2 lengths of round line gutter together. The system offers good flow capacity when removing rainwater from your roof. Suitable for new builds house refurbishments conservatories...

The 110mm Black Double Socket Coupling is used to form a push-fit joint between 2 lengths of 110mm soil pipes. This product can also be used as a slip coupling by simply removing the centre stops in the middle of the product.

The 110mm Grey Push-Fit Air Admittance Valve allows a soil stack fitted with an external air admittance valve to terminate within three metres of a window opening. This allows the pipe to terminate at the same height as if it were installed internally...

The 92.5° Anthracite Grey Socket/Spigot 110mm Soil Pipe Bend is used for changing the direction of 110mm soil pipe systems. This push-fit bend has a spigot at 1 end which should always form the lower joint and a socket at the other end.

The 92.5° Black Double Socket/Spigot 110mm Branch Soil Pipe allows the connection of horizontal pipes to vertical soil stack systems at 92.5°. The branch has 2 closed side bosses which when when drilled out using a 50mm - 57mm hole cutter and boss adaptors...