> > >

Order by: Relevance
Price: Low to High, High to Low


Image of Trend Trend C012AX1/4TC 8 x 25mm Two Flute Straight Cutter Trend Trend C012AX1/4TC 8 x 25mm Two Flute Straight Cutter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. D 8 mm C 25 mm Overall length 68.5 mm Shank Diameter 1/4 inch

£16.79
More Information
Image of Trend Trend B20 Bearing 20mm diameter 1/4" bore Trend Trend B20 Bearing 20mm diameter 1/4" bore

Bearings are shielded to prevent penetration of dust and grease packed for life.

£13.63
More Information
Image of Trend Trend GB158 Guide Bush, 15.8mm Diameter Trend Trend GB158 Guide Bush, 15.8mm Diameter

Guide bush guides the router when using a template. Outside diameter 15.8 mm Outside diameter 5/8" Inner diameter 14 mm Projects from plate 6 mm ID 14 mm Plate diameter 60 mm Csk screw hole centres 50 mm

£13.63
More Information
Image of Trend Trend GB78 Guide Bush 7.8mm x 4mm Trend Trend GB78 Guide Bush 7.8mm x 4mm

Guide bush guides the router when using a template. For use with the CDJ300/01 Dovetail template. Outside diameter 7.8 mm Projects from plate 4 mm Diameter of plate 60 mm Csk screw hole centres 50 mm

£12.59
More Information
Image of Trend Trend B21 Bearing 21mm diameter 1/4" bore Trend Trend B21 Bearing 21mm diameter 1/4" bore

Bearings are shielded to prevent penetration of dust and grease packed for life.

£16.79
More Information
Image of Trend Trend C012AX8MMTC 8 x 25mm Two Flute Straight Cutter Trend Trend C012AX8MMTC 8 x 25mm Two Flute Straight Cutter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. D 8 mm C 25 mm Overall length 68.5 mm Shank Diameter 8 mm

£17.84
More Information
Image of Trend Trend C043X1/4TC 60° Chamfer V Groove Cutter Trend Trend C043X1/4TC 60° Chamfer V Groove Cutter

For veining, panelling, 'V' grooving, bevelling & chamfering. D 1/2 inch D 12.7 mm C 7/16 inch C 13 mm C2 13 mm C3 11 mm A 60 degrees Overall length 53 mm Shank Diameter 1/4 inch

£20.99
More Information
Image of Trend Trend C001AX1/4TC 3 x 9.5mm Two Flute Straight Cutter Trend Trend C001AX1/4TC 3 x 9.5mm Two Flute Straight Cutter

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. D 3 mm C 3/8 inch C 9.5 mm Overall length 56.5 mm Shank Diameter 1/4 inch

£15.73
More Information
Image of Trend Trend 12/6X1/2TC Radius Cutter Trend Trend 12/6X1/2TC Radius Cutter

For coves and part of a rule joint with 1/2" shank diameter. D 12.7 mm C 19 mm R 1/4 inch R 6.3 mm OL 56 mm

£57.73
More Information
Image of Trend Trend 865X1/4TC Bearing Guided Finger Jointer Trend Trend 865X1/4TC Bearing Guided Finger Jointer

A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints.

£78.73
More Information