Ideal for shelves. Edge moulding applications only. D 22 mm C 25 mm B 16 mm R 3 mm Shank Diameter 1/2 inch

This can be used for recessing circular hinges, accurate repetitive routing. This should be used with a template and guide bush fitted to the router base. D 35 mm OL 60 mm

For producing ovolo and rounding over edge moulds, using a side fence or back fence. D 1/2 inch D 12.7 mm C 23/64 inch C 9 mm R 4.8 mm Overall length 51.5 mm Shank Diameter 1/4 inch

This two flute cutter gives a finer finish and has better plunge cutting characteristics. D 1/4 inch D 6.3 mm C 28 mm OL 63 mm Shank Diameter 1/4 inch

Reinforced plastic lift and lock ratchet system. Thread M6 Thread Length 30 mm H 28 mm D 42 mm

To increase gluing area producing a strong joint in drawer production. D 25.4 mm C 12.7 mm

A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes. D 36 mm D2 16 mm C 33 mm R 20 mm Shank Diameter 1/2 inch

A range of small sized panelling cutters. Ideal for veining and fluting applications. D 14.5 mm C 19.5 mm R 7.5 mm

By making a second pass at 90 degrees a full corner bead can be cut. D 28 mm D2 25.7 mm B 16 mm R 4.8 mm Shank Diameter 1/4 inch

For coves and part of a rule joint. D 1 1/2 inch D 38.1 mm C 1 1/4 inch C 31.7 mm R 3/4 inch R 19.1 mm