Trend Trend C049X1/4TC Self Guided Chamfer
Self-guiding 45° chamfer/bevel cutter. D 32 mm C 1/2 inch C 12.7 mm B 9.5 mm A 45 degrees Overall length 62 mm Shank Diameter 1/4 inch |
£34.63 More Information |
|
Trend Trend C141X1/4TC Panel Veining Cutter
For decorative panel and veining work. D 3/8 inch D 9.5 mm C 7.5 mm R 4.8 mm Overall length 47.5 mm Shank Diameter 1/4 inch |
£31.49 More Information |
|
Trend Trend 18/55X1/4TC Bearing Guided Classic Panel 1/4" Shank
Shank mounted bearing follows template mounted on board surface. It is advisable that the template is at least 5mm thicker than the cutter. D 22 mm C 1/2 inch C 12.7 mm B 22 mm R 4 mm R2 5.5 mm |
£73.49 More Information |
|
Trend Trend 84/93X1/2TC Drawer Pull Cutter
An initial cut with a straight cutter is required to produce the drawer pull profile. D 45 mm D2 24 mm C 17 mm R 5 mm R2 2 mm Overall Length 60 mm Shank Diameter 1/2 inch |
£149.09 More Information |
|
Trend Trend 9/19X1/2TC Staff Bead/Nosing Cutter
19mm radius Bead/nosing cutter |
£164.84 More Information |
|
Trend Trend 9/5X1/2TC Staff Bead/Nosing Cutter
12mm radius Bead/nosing cutter. D 42.9 mm C 25.4 mm C2 40 mm R 12.7 mm Shank Diameter 1/2 inch |
£94.49 More Information |
|
Trend Trend 9/6X1/2TC Staff Bead/Nosing Cutter
16mm radius Bead/nosing cutter D 50.8 mm C 32 mm C2 51 mm R 16 mm Shank Diameter 1/2 inch |
£121.80 More Information |
|
Trend Trend 12/4X1/4TC Radius Cutter
For coves and part of a rule joint with a 1/4" shank diameter. D 8 mm C 1/2 inch C 12.7 mm R 4 mm OL 46 mm |
£43.04 More Information |
|
Trend Trend 9/73x1/4TC Bearing Guided Corner Bead Cutter
By making a second pass at 90 degrees a full corner bead can be cut. D 31.9 mm D2 28.6 mm B 16 mm R 7 mm Shank Diameter 1/4 inch |
£94.49 More Information |
|
Trend Trend 84/94X1/4TC Drawer Pull Cutter
An initial cut with a straight cutter is required to produce the drawer pull profile. D 19 mm C 13 mm R 4 mm Overall Length 48 mm Shank Diameter 1/4 inch |
£101.83 More Information |