Help - installed a new battery the wrong way round!

Ok, so 1st, fix the obvious, get a new fuse. Scrap yard or Online.
You might be lucky with a local motor factor or Mazda dealer.

Do youtube and see how its done.

That is about all you can do. IF it works, good.
If not, time to call in the pro's
 
Sponsored Links
Ok, so 1st, fix the obvious, get a new fuse. Scrap yard or Online.
You might be lucky with a local motor factor or Mazda dealer.

Do youtube and see how its done.

That is about all you can do. IF it works, good.
If not, time to call in the pro's
Great, thanks for your help I really appreciate it.
 
If you are short of cash, you can go onto ebay (or local for that matter) and search for "2010 MAzda 2 Breaking".
Put your post code in and a radius you can travel and you might get a few hits.
Send them a PM and they might pull one out of the banger for a few bob.
Should other stuff be needed, they might have that as well.

Cheaper than dismantlers and motor factors.
 
Sponsored Links
If you are short of cash, you can go onto ebay (or local for that matter) and search for "2010 MAzda 2 Breaking".
Put your post code in and a radius you can travel and you might get a few hits.
Send them a PM and they might pull one out of the banger for a few bob.
Should other stuff be needed, they might have that as well.

Cheaper than dismantlers and motor factors.
Great
I'm looking now and there seems to be a few about.
 
Er.

If you are not arsed.......
You could dead short it with a nail.

But if you were to **** up the battery terminals again, you wipe out all the electronics and the battery.....

But its a 2010 car so.....




*ONLY A OBSERVATION!!!*
 
Er.

If you are not arsed.......
You could dead short it with a nail.

But if you were to **** up the battery terminals again, you wipe out all the electronics and the battery.....

But its a 2010 car so.....




*ONLY A OBSERVATION!!!*
It's not mine, it belongs to the missus.
 
Sponsored Links
Back
Top