how much is a plumber

If it was overheating then guess boiler was working, worked on one last week with boiler on light illuminated, had volts to fan but it had seized. Good luck
 
Sponsored Links
Sponsored Links
This morning, the CH is on, and all of the lights on the boiler is on, and everything is running as it should, no noisey pipes either. I have not touched the HW yet, because i just know it`s not going to work.
 
I haven`t looked at the boiler, the CH and boiler never really were the problem. It`s when i put the HW ot, it wont work and when i switch the CH off then the boiler goes off completely. Unless something in the boiler has 2 wires the wrong way round or in the control box of the CH and HW thingy or the on switch below it. The pipes are not banging and the walls are not squeaking, so that`s got to be something. The CH is doing as it`s told, so we wont freeze to death. I`ve got gas, so i can still boil afew pans for a bath so we dont stink to death.
 
OMG... I`ve turned the CH off and the HW on and everything is working.......For now. So it could have been because the stat was wired up wrong...
 
all the wiring in the box seems ok. we tested for lives and they where ok and i've looked at pic and it seem alright.
i don't expect someone to wire the stat the wrong way. i thought he wired it from box not just at the stat.
 
Pinpointed the problem. It was the faulty tank stat. And now it`s wired up properly, we have toasty hot water and CH.

Your lovely you are, i thank you so much. I didn`t think such a simple thing could cause so many problems.
 
I know what you mean, unless you are there, such a simple problem can take hours to find. I suppose it`s the same as fixing PC`s over the intenet. Especially s the perso on the other end hasn`t go a clue. Like me i suppose. But i learn fast. I manged to rip out a whole bathroom and replace it within a week with no problms and no leaks and i had nver done plumbing in my life, only what i have seen other people do on the telly and taking to people.

I suppose other people have learned from reading this thread also.

Once again i thank you for all your help.
 
Yes, at the moment, everything seem to be working fine, although i have not put CH and HW on together yet. I suppose i should.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top